Halogen Free and Brominated Flame Retardants
NOTE: You will discover that certain areas (links) are not available if you are not an IPC member.
Recent concerns over use of brominated flame retardants (BFRs) have increased interest in halogen-free electronics. However, BFRs are not the only source of halogens in PCBs. Most PCB resins are epoxies and epoxy resins contain measurable levels of chlorine. Additional halogens are added to PCB laminates through glass sizes, wetting agents, curing agents and resin accelerators. It is important to realize that even without use of BFRs, there may be finite levels of halogens present as impurities in your product. The International Electrochemical Commission (IEC) defines halogen-free based on chlorine and bromine levels.
IPC’s Halogen Free Committee has developed a white paper investigating the issues associated with halogen-free electronics. The IPC white paper provides information on cost, performance, product reliability, consumer safety, and end-of-life issues of common alternative flame retardants used in PCBs.
Regulations and Legislation
There are no bans or restrictions on the use of TBBPA or DecaBDE in EEE. However, other BFRs are banned in the U.S. and Europe. (More…)
Technical papers on halogen-free electronics are available. (More…)
Environmental and Health Issues
Existing risk assessments do not demonstrate a public health or environmental concern from the most widely used flame retardants in electronic equipment, DecaBDE and TBBPA. (More…)
Links for more information on halogen-free electronics and brominated flame retardants can be found here. (More…)
You will discover that certain areas are not available if you are not an IPC member.